这几天家里的cvr100w开始频繁死机是怎么回事

YY骑士

之前用了3年的tplingk坏了
12年8月份买的cvr100w路由器
结果这几天路由器频繁死机，设定页面打不开，网络断掉，必须重启路由器
好像自己打游戏没什么问题，但是老婆在旁边用ipad的优酷客户端看片子看一段时间后就会死住
至少每次死机时候都是老婆在用优酷客户端看片子，我这边在打网游
结果晚上开迅雷2m全速下载了16分钟后他又挂了

看了一下昨天的路由器日志，表示看不懂，求分析。。。我也不知道为啥时间是错误的

2010-01-01 00:00:12 CVR100W kern.warning CPU revision is: 00019749
2010-01-01 00:00:12 CVR100W kern.warning Found an ST compatible serial flash with 128 64KB blocks; total size 8MB
2010-01-01 00:00:12 CVR100W kern.warning Determined physical RAM map:
2010-01-01 00:00:12 CVR100W kern.warning memory: 04000000 @ 00000000 (usable)
2010-01-01 00:00:12 CVR100W kern.warning Normal          0 ->    16384
2010-01-01 00:00:12 CVR100W kern.warning HighMem     16384 ->    16384
2010-01-01 00:00:12 CVR100W kern.warning 0:        0 ->    16384
2010-01-01 00:00:12 CVR100W kern.warning Built 1 zonelists.  Total pages: 16384
2010-01-01 00:00:12 CVR100W kern.warning Primary instruction cache 32kB, physically tagged, 4-way, linesize 32 bytes.
2010-01-01 00:00:12 CVR100W kern.warning Primary data cache 32kB, 4-way, linesize 32 bytes.
2010-01-01 00:00:12 CVR100W kern.warning PID hash table entries: 512 (order: 9, 2048 bytes)
2010-01-01 00:00:12 CVR100W kern.warning CPU: BCM53572 rev 1 at 300 MHz
2010-01-01 00:00:12 CVR100W kern.warning Using 150.000 MHz high precision timer.
2010-01-01 00:00:12 CVR100W kern.warning Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
2010-01-01 00:00:12 CVR100W kern.warning Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
2010-01-01 00:00:12 CVR100W kern.warning Mount-cache hash table entries: 512
2010-01-01 00:00:12 CVR100W kern.warning PCI: no core
2010-01-01 00:00:12 CVR100W kern.warning PCI: no core
2010-01-01 00:00:13 CVR100W kern.warning PCI: Fixing up bus 0
2010-01-01 00:00:13 CVR100W kern.warning IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
2010-01-01 00:00:13 CVR100W kern.warning TCP established hash table entries: 2048 (order: 2, 16384 bytes)
2010-01-01 00:00:13 CVR100W kern.warning TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
2010-01-01 00:00:13 CVR100W kern.warning seal: netlink socket create success
2010-01-01 00:00:13 CVR100W kern.warning squashfs: LZMA suppport for slax.org by jro
2010-01-01 00:00:13 CVR100W kern.err pflash: found no supported devices
2010-01-01 00:00:13 CVR100W kern.warning Register DIAG LED in /proc/sys/diag_blink.
2010-01-01 00:00:13 CVR100W kern.warning The DIAG LED GPIO is 11, diag(2).
2010-01-01 00:00:13 CVR100W kern.warning Register DIAG LED success in /proc/sys/diag_blink.
2010-01-01 00:00:13 CVR100W kern.warning u32 classifier
2010-01-01 00:00:13 CVR100W kern.warning Actions configured  
2010-01-01 00:00:13 CVR100W kern.warning Netfilter messages via NETLINK v0.30.
2010-01-01 00:00:13 CVR100W kern.warning nf_conntrack version 0.5.0 (512 buckets, 4096 max)
2010-01-01 00:00:13 CVR100W kern.warning ctnetlink v0.93: registering with nfnetlink.
2010-01-01 00:00:13 CVR100W kern.warning ip_tables: (C) 2000-2006 Netfilter Core Team
2010-01-01 00:00:13 CVR100W kern.warning ip6_tables: (C) 2000-2006 Netfilter Core Team
2010-01-01 00:00:13 CVR100W kern.warning VFS: Mounted root (squashfs filesystem) readonly.
2010-01-01 00:00:13 CVR100W kern.warning Warning: unable to open an initial console.
2010-01-01 00:00:13 CVR100W kern.warning Failed to execute /init
2010-01-01 00:00:13 CVR100W kern.warning Algorithmics/MIPS FPU Emulator v1.5
2010-01-01 00:00:13 CVR100W kern.warning ctf: module license \'Proprietary\' taints kernel.
2010-01-01 00:00:13 CVR100W kern.warning @@@@==>et_module_init: passivemode set to 0x0
2010-01-01 00:00:13 CVR100W kern.warning eth0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 5.100.138.11
2010-01-01 00:00:13 CVR100W kern.warning Found an ST compatible serial flash with 128 64KB blocks; total size 8MB
2010-01-01 00:00:13 CVR100W kern.warning dns init!
2010-01-01 00:00:13 CVR100W kern.warning insmod the dnshook module!
2010-01-01 00:00:13 CVR100W kern.warning mcf insmod successfully!
2010-01-01 00:00:14 CVR100W kern.warning eth1: Broadcom BCM4347 802.11 Wireless Controller 5.100.138.11
2010-01-01 00:00:14 CVR100W kern.warning COEX: downgraded chanspec 0x2d08 to 0x2b06: channel 4 used by exiting BSSs  
2010-01-01 00:00:14 CVR100W kern.warning COEX: downgraded chanspec 0x2e09 to 0x2b0b: channel 4 used by exiting BSSs  
2010-01-01 00:00:14 CVR100W kern.warning COEX: downgraded chanspec 0x2d03 to 0x2b01: channel 4 used by exiting BSSs  
2010-01-01 00:00:14 CVR100W kern.warning COEX: downgraded chanspec 0x2d06 to 0x2b04: channel 1 used by exiting BSSs  
2010-01-01 00:00:15 CVR100W daemon.err dnsmasq[413]: failed to load names from /etc/hosts: No such file or directory
2010-01-01 00:00:22 CVR100W kern.warning find_free_index  ++++++add dev index: 7, vif index: 0
2010-01-01 00:00:22 CVR100W kern.warning find_free_index  ++++++add dev index: 9, vif index: 1
2010-01-01 00:00:22 CVR100W kern.warning find_free_index  ++++++add dev index: 13, vif index: 2
2010-01-01 00:00:25 CVR100W kern.warning vlan2: Setting MAC address to  d8 24 bd 77 6c 06.
2010-01-01 00:00:25 CVR100W kern.warning wl_ioctl():Disable CTF for Wireless QoS
2010-01-01 00:00:26 CVR100W local2.warning pppd[483]: Couldn\'t increase MTU to 1500
2010-01-01 00:00:26 CVR100W local2.err pppd[483]: Couldn\'t increase MRU to 1500
2010-01-01 00:00:26 CVR100W local2.warning pppd[483]: Couldn\'t increase MTU to 1500
2010-01-01 00:00:26 CVR100W local2.err pppd[483]: Couldn\'t increase MRU to 1500
2010-01-01 00:00:30 CVR100W kern.alert ctf_ipc_delete_all_2
2010-01-01 00:00:33 CVR100W kern.warning find_used_index  find vif index: 2, dev index: 13
2010-01-01 00:00:33 CVR100W kern.warning vif_delete_dev  ------dev index: 13, vif_index:2, maxvif: 3
2010-01-01 00:00:33 CVR100W kern.warning free_used_index  vif_index: 2
2010-01-01 00:00:33 CVR100W kern.warning find_used_index  find vif index: 1, dev index: 9
2010-01-01 00:00:33 CVR100W kern.warning vif_delete_dev  ------dev index: 9, vif_index:1, maxvif: 2
2010-01-01 00:00:33 CVR100W kern.warning free_used_index  vif_index: 1
2010-01-01 00:00:33 CVR100W kern.warning find_used_index  find vif index: 0, dev index: 7
2010-01-01 00:00:33 CVR100W kern.warning vif_delete_dev  ------dev index: 7, vif_index:0, maxvif: 1
2010-01-01 00:00:33 CVR100W kern.warning free_used_index  vif_index: 0
2010-01-01 00:00:37 CVR100W kern.warning find_free_index  ++++++add dev index: 7, vif index: 0
2010-01-01 00:00:38 CVR100W kern.warning find_free_index  ++++++add dev index: 9, vif index: 1
2010-01-01 00:00:38 CVR100W kern.warning find_free_index  ++++++add dev index: 13, vif index: 2
2010-01-01 00:00:38 CVR100W kern.warning find_free_index  ++++++add dev index: 14, vif index: 3
2010-01-01 00:00:40 CVR100W kern.warning wan ip 74c01265
2010-01-01 00:00:40 CVR100W kern.warning lan_interface[0]: ip c0a80101  mask ffffff00
2010-01-01 00:00:40 CVR100W kern.warning lan_interface[1]: ip c0a8ff01  mask ffffff00
2010-01-01 00:00:40 CVR100W kern.warning wl_ioctl():Disable CTF for Wireless QoS
2010-01-01 00:00:53 CVR100W daemon.err mDNSResponder: ERROR: getOptRdata - unknown opt 4
2010-01-01 00:00:54 CVR100W daemon.err mDNSResponder: ERROR: getOptRdata - unknown opt 4
2010-01-01 00:00:56 CVR100W daemon.err mDNSResponder: ERROR: getOptRdata - unknown opt 4
2010-01-01 00:01:00 CVR100W daemon.err mDNSResponder: ERROR: getOptRdata - unknown opt 4

YY骑士

这是要换一个的节奏？
目前换啥好？腾达n80?

YY骑士

美国网件（NETGEAR）WNDR3700 600M双频千兆lan口无线路由器
v4版
cpu：Atheros AR9344 560MHz
ram：128
flash：128

这个可以吗？

YY骑士

白左 发表于 2014-3-13 12:39
这个型号好像有点眼熟, 似乎和我的一样..你是否更新了固件？这个型号官方固件有问题, 不要用最新版, 退回老 ...

最新的固件也是13年的1.0.1.19貌似
老固件直接升级固件那边刷回去？
感觉也不像固件问题，之前是一切正常的，就最近几天，刚刚换了电信精品网，外服打的high
结果老婆看几小时优酷ipad客户端，路由器就挂了
昨天晚上试验了一下讯雷，结果全速下载16分钟后挂了

总不可能是精品网导致的吧。。。电信那边应该也不会有问题
所以就剩下觉得是路由器完蛋了

dangogo

呃。。这货是实验性质的产品。。。找售后吧。。。

softworm

最新版本的固件是1.0.1.21
http://software.cisco.com/downlo ... &reltype=latest

YY骑士

softworm 发表于 2014-3-13 14:26
最新版本的固件是1.0.1.21
http://software.cisco.com/download/release.html?mdfid=284758089&catid=26843 ...

感谢，我回去升级试试
不过感觉固件问题可能不大

我开着路由器家里没人情况下不死机，很正常
我打游戏也问题
只有我老婆用youku的ipad客户端看片子，这个是p2p模式下载的？我用讯雷时候会路由器死掉
固件问题的话，升了快1年了，应该不可能现在才出问题吧

YY骑士

思科他们说你这个多数是路由器问题
当初刚刚买来能跑可能是因为东西还新的，能承受住
跑这么久了以后，可能就未必行了

我说我低流量没事，大流量时候会死
他说多数是设备问题
我问会不护是网络问题
他说不会，因为是你路由器失去响应，而不是路由器正常网络断网

YY骑士

白左 发表于 2014-3-13 17:31
到家了
果然没错，就是和我一个型号的

我x。。。。我买来时候貌似就1.0.1.16了吧
你竟然还有。5的？

我去搜索一下下载，然后开迅雷下载
我现在貌似也不是不稳定
我是一遇到大流量就路由器死机。。。我汗
就最近3天出来之前没事

刚刚实验了一下
1.0.1.19下
开迅雷开始下载，大概15分钟后，就根本打不开路由器设定页面了，这时候路由器的cpu和内存占用都将近100%，就算关掉迅雷，也还是打不开路由器设定页面。
但是这时候网络还没断，网页正常能上
30分钟左右开始网页基本打不开了，但是还是没显示断网
停掉迅雷后还是无法打开路由器设置页面

bubuyu

家里最早的无线路由网件WGR614v7用迅雷下东西很容易就把路由给下死机了后来换成肾家的Airport Extreme后，有一次内网传大量数据把笔记本的无线网卡给搞死过，路由还好好的。

铅笔画

自从用了这sb路由，我的下载速度经常会只有一百多K，最近还老是获取不到ip地址
界面选项也难懂得一逼
思科一生黑

----发送自 STAGE1 App for Android.

YY骑士

我x咧。。。刷到1.0.1.5后，我还特地还原出厂设置后重新在设定
现在点路由器页面选项老是会跳粉红色页面显示“No request found.”
不过同样的cpu和内存占用率上升的很慢，一关迅雷就马上回复正常，不像1.0.1.19只上不下。下载了30分钟多了路由器还没死
不过真心容易跳粉红色页面显示“No request found.”


=v=看着旁边刚刚送到的网件3700犹豫中。。。要不会7天无条件退款捏

算了。。。刷成1.0.1.5的cvr100w拿到单位用去
家里还用网件3700，不过找了半天没找到网件wps哪里关