啥? VGA是可以淘汰了,模拟的信号给液晶完全不能行。 DVI不能上什么能上,HD4850两个DVI口,一个接1920x1200的T260,一个转HDMI接1920x1080的Sony 40J400,啥毛病没有。。。 早期的DVI接口由于硬件的限制确实有可能上不了1920*1080,可以在厂家网站查到的:http://www.nvidia.com/page/pg_20040109440047.html
DVI support for compatibility with nextgeneration flat panel displays with resolutions up to and including 1600×1200
[ 本帖最后由 阿斯兰64 于 2009-4-6 18:10 编辑 ] - -我前年电脑集显的DVI都能上1920x1200。。。。 楼主你的DVI线是18+1还是24+1的? 5500已经是很久前的东西了,nv已说明了只能到1600。就是4850的两个dvi也是不一样的,仅有一个支持双通道,可以上高于1920的分辨率。 单通道DVI-D的带宽带1920X1200都没问题(刷新率60)
更何况双通道的 原帖由 阿斯兰64 于 2009-4-6 18:13 发表 http://bbs.saraba1st.com/images/common/back.gif
5500已经是很久前的东西了,nv已说明了只能到1600。就是4850的两个dvi也是不一样的,仅有一个支持双通道,可以上高于1920的分辨率。
两个都能上谢谢,我先在就在用好不好。
http://p13.freep.cn/p.aspx?u=v20_p13_p_0904061851571857_0.jpg 原帖由 altauro 于 2009-4-6 18:44 发表 http://bbs.saraba1st.com/images/common/back.gif
两个都能上谢谢,我先在就在用好不好。
http://p13.freep.cn/p.aspx?u=v20_p13_p_0904061851571857_0.jpg
你理解错了,我的本意是说高于1920而不是到1920。
但是查了ati的规格后发现4800系列和4600系列居然是不同的:
4600seriers:
Two integrated DVI display outputs
Primary supports 18-, 24-, and 30-bit digital displays at all resolutions up to 1920x1200 (single-link DVI) or 2560x1600 (dual-link DVI)2
decondary supports 18-, 24-, and 30-bit digital displays at all resolutions up to 1920x1200 (single-link DVI only)2
4800seriers:
Two integrated dual-link DVI display outputs
Each supports 18-, 24-, and 30-bit digital displays at all resolutions up to 1920x1200 (single-link DVI) or 2560x1600 (dual-link DVI)2
Each includes a dual-link HDCP encoder with on-chip key storage for high resolution playback of protected content3
这倒是我记错了。
页:
[1]